Description

Diagram

Service

Platen knob - On right side of printer

Base assembly - Bottom cover

Control panel assembly - Includes ribbon cable

Top cover

PRIMER ASSEMBLY

Lift Up Front Cover (For the Print Cartridges) - Attaches to

Right Side Plate - Has a Well for the Carriage Belt Tension

Ribbon Cable - from Main Logic Board to Print Mechanism

Lower Pinchwheel - Attaches to shim assembly (2 used)

Carriage assembly - Includes carriage PC board

Right side tractor drive (sprocket) cover (shield)

Left side tractor drive (sprocket) cover (shield)

LEAD FRAME BRUSH

Primer Absorber (Large) - at Bottom of Primer Assembly

Right Side Tractor Drive (Sprocket) Assy - on Platen Roller

Left Side Tractor Drive (Sprocket) Assy - on Platen Roller

Main Logic Board - with RS-232C Interface (Option 001)

Main Logic Board - with HP-IB Interface (Option 002)

Main Logic Board - with CENTRONICS Interface (Option 004)

3630A PaintJet Printer Hardware Support Manual

3630A PaintJet printer user's manual

3630A PaintJet printer user's manual (French)

Hex Standoff - for HP-IB Connector (2 Used)

Hex Standoff - for the HP-IB Connector (2 Used)

SCREW 4X10

SCR-040-300NWS

Leveler foot - Stabilizing foot on bottom of printer/stacker

Foot - for Bottom of Printer (4 Used)

PC Board Guide - for the Power Supply in the Disk Drive/

Leveling Foot - Bottom of Printer

Foot - Attaches to Bottom of Printer (6 Used)

Foot - for Bottom of Printer

For a Serial Number Prefix >&= 3205A

XTAL 8 MHZ

EDGE WIRE SADDLE

Scanner ESD Tape - 1/2 Inch Wide by 72 Yards Long - Adhesive

ROLLER

LOCK PLATE

LOCK SHAFT (A)

ANTI-STATIC BRUSH

RUBBER STOPPER

'Paper Out' Sensor Reed Switch - in Center of Mechanism

FINISHER REAR CASTER

MAGNET CATCH

Retaining Ring - for Securing Pinchwheel to Arm (2 Used)

Retaining E-Ring - Holds Clutch Assembly in Place

Retaining Ring - for Securing Pinchwheel to Arm (2 Used)

Screw - for Foot, or Ground on I/O Bracket

Screw - for CENTRONICS Connector (2 Used)

Screw - for Main Logic and Power Supply Boards (12 Used)

Screw - Used to Hold RFI Shield to Main Logic Board (7 Used)

Screw - for Mounting Fusing Assembly (4 Used)

Connector (2 Used) (Option 006)

Thumbscrew - Secures Cover Plate to Optional (MIO) I/O Slot

SCREW LONG DOGP

Taptite Screw - Holds Seperation Pad and Spring in Place

Screw M3 7mm

Pan head machine screw with washer

Pan head taptite screw with washer

Stabilizing screw for the 2000 sheet feeder - On right side of feeder assembly - 2 used

Pan head plastite screw with washer

Pan head plastite screw with washer

Screw, M3x12.30, Plastic

SCREW-TAPTITE

SCREW-TPG PT M3.0 X 1.27 9MM-L

SCREW-MACH M3 X 0.5 6.9MM-LG PAN-HD

SCR-MACH M4X.7 10MM-LG ROHS

Hex Standoff - for RS-232C Connector (2 Used)

PULLEY/1

PAPER TRAY COVER

PaperTray for Color LaserJet 5, 5M

CVR Cassette (LGL Tab)

Cassette Spring

Screw - Attaches 'T' Shaped Latches to Center Cover

Pan head plastite screw embly (two used)

FULCRUM SHAFT

SPRING

DRIVEN SHAFT METAL

BEARING NMB SSLF-1480ZZ

ROLLER

ROLLER

BALL BEARING NSK 6000ZZNR

BUSHING

DRAWER SCREW

TRAY LOCK PULLEY

SPACER PLATE

LEVER

RELEASE KNOB

BUSHING

7060A SketchPro tablet (45911B tablet with accessories)

Additional Self Paced Training Test (1 Test) for 7440A

Cover Plate - for HP-IB Connector (Option 002)

assembly rides on (Goes through the center of the carriage)

assembly rides on

Left pinchwheel arm

Right pinchwheel arm

Pen Holding Arm (Claw) - on Carriage Assembly

Chassis assembly (Black plastic) - Main internal structure

Carriage Pen Lift Bar - Connects to Solenoid and Damper

Pulley Wedge - for Carriage Belt Tension