Part number |
Description |
Diagram |
Service |
|
Tensioning arm - For the paper drive belt tensioning pulley |
|
|
|
carousel assembly |
|
|
|
Worm Drive Gear and Shaft - Rotates the Carousel Base Assy |
|
|
|
Sliding gear - Slides on the carousel worm drive shaft |
|
|
|
Clutch arm - Engages the sliding gear on the carousel worm |
|
|
|
Idler pulley - For paper belt tension - Mounts on arm on the |
|
|
|
chassis (On rear right side of the plotter mechanism) |
|
|
|
Lift-Up Viewing Window - Attaches to the Top Cover |
|
|
|
Carriage Drive (2 Used) |
|
|
|
Ribbon Cable - from Main Logic Board to Paper Drive Motor |
|
|
|
Ribbon Cable - from Main Logic Board to Carriage Drive Motor |
|
|
|
Grit Wheel Shaft Assembly - for Paper Drive |
|
|
|
Pen lift solenoid assembly - Connects to the pen lift bar |
|
|
|
Pen carriage assembly (Complete) |
|
|
|
Key panel assembly - Control keyboard |
|
|
|
Base Plate Assembly (Bottom Cover) - Includes the 4 Feet |
|
|
|
Ribbon Cable - from Main Logic Board to Key Panel Assembly |
|
|
|
Pen carousel - For fiber tip pens |
|
|
|
Top case (enclosure) - Includes nameplate |
|
|
|
Main Logic Board - with RS-232C Interface (Option 001) |
|
|
|
Main Logic Board - with HP-IB Interface (Option 002) |
|
|
|
7440A colorpro plotter service manual |
|
|
|
7440A ColorPro plotter programming manual |
|
|
|
7440A ColorPro plotter operating manual |
|
|
|
7440A ColorPro plotter pocket guide |
|
|
|
7440A ColorPro plotter operating manual (German) |
|
|
|
7440A ColorPro plotter operating manual (French) |
|
|
|
7440A ColorPro plotter operating manual (Spanish) |
|
|
|
7440A ColorPro plotter operating manual (Italian) |
|
|
|
7440A ColorPro plotter operating manual (Japanese) |
|
|
|
Carriage Block - Main Part of Carriage which Arms Attach to |
|
|
|
Coupler ring - For coupling motor to grit wheel drive shaft |
|
|
|
Coupler End Cap (Mounts on End of Grit Wheel Shaft) - for |
|
|
|
Pen Holder Arm (Pawl) - Attaches to Pen Stable (2 Used) |
|
|
|
Right pen capper arm - Caps pen when in stable |
|
|
|
Left pen capper arm - Caps pen when in stable |
|
|
|
Right Pen Stable - Holds pen when not plotting |
|
|
|
Left Pen Stable - Holds pen when not plotting |
|
|
|
Right pen holder arm - Attaches to carriage block |
|
|
|
Left pen holder arm - Attaches to carriage block |
|
|
|
End Cap - for Pen Lift Bar - has Actuating Pin which Extends |
|
|
|
Right pinchwheel arm |
|
|
|
Left pinchwheel arm |
|
|
|
Pinchwheel lift bar - Has 'paper loading' handle |
|
|
|
(Mounts on the Left Side of the Chassis) |
|
|
|
Main Logic Board - with HP-IL Interface (Option 003) |
|
|
|
Main Logic Board - with RS-232C Interface (Option 001) |
|
|
|
Main Logic Board - with HP-IB Interface (option 002) |
|
|
|
(Black Plastic Structure) - Mounts on Left Rear of Chassis |
|
|
|
Grit Wheel Shaft Assembly - for Paper Drive |
|
|
|
Motor/encoder assembly - 'X' axis drive (Grit wheel) |
|
|
|
Motor/Encoder Assembly - 'Y' Axis Drive (Carriage) |
|
|
|
Main Logic Board - with RS-232C Interface (Option 001) |
|
|
|
Main Logic Board - with HP-IB Interface (option 002) |
|
|
|
7470A graphics plotter service manual |
|
|
|
7470A graphics plotter interfacing and programming manual |
|
|
|
7470A graphics plotter operating manual |
|
|
|
7470A graphics plotter interconnecting guide |
|
|
|
7470A graphics plotter operating manual (French) |
|
|
|
Front Panel - with Logo - has Holes for Keyboard Switches |
|
|
|
Cover Plate - for RS-232C Connector (Option 001) |
|
|
|
Cover Plate - for HP-IB Connector (Option 002) |
|
|
|
Paper bail - Wire rack underneath the plotter |
|
|
|
Pen Boot - for Fiber-Tip Pen Carousel (1/Pkg) |
|
|
|
Pen Carriage Damper (Rubber Boot) - on Back of Carriage Assy |
|
|
|
Pinchwheel - Does NOT include retaining ring (2 used) |
|
|
|
Top case - Does NOT include window |
|
|
|
Lift-Up Viewing Window - on Top Cover |
|
|
|
Pen Lift Solenoid Assembly (Includes Solenoid Coil and |
|
|
|
Refillable drafting pen carousel |
|
|
|
Pen Boots - for Refillable Drafting Pen Carousel (6/Pkg) |
|
|
|
Grit Wheel Shaft Assembly - for Paper Drive |
|
|
|
Main Logic Board - with RS-232C Interface (Option 001) |
|
|
|
Carousel housing assembly - Includes motor (Which is riveted |
|
|
|
Main Logic Board - with RS-232C Interface (Option 001) |
|
|
|
Main Logic Board - with HP-IB Interface (Option 002) |
|
|
|
Main Logic Board - with HP-IB Interface (Option 002) |
|
|
|
7475A graphics plotter service manual |
|
|
|
7475A graphics plotter interfacing and programming manual |
|
|
|
7475A graphics plotter operating and interconnection manual |
|
|
|
7475A graphics plotter programmer's reference card |
|
|
|
7475A Graphics Plotter Operating & Interconnection Manual - |
|
|
|
7475A Graphics Plotter Operating & Interconnection Manual - |
|
|
|
7475A Graphics Plotter Operating & Interconnection Manual - |
|
|
|
7475A Graphics Plotter Operating & Interconnection Manual - |
|
|
|
7475A Graphics Plotter Operating & Interconnection Manual - |
|
|
|
Additional Self Paced Training Test (1 Test) for 7550A |
|
|
|
Cover Plate - for RS-232C/CENTRONICS Connectors |
|
|
|
Cover Plate - for RS-232C/HP-IB Connectors |
|
|
|
For the 'A' and 'A4' size paper trays only |
|
|
|
- For the 'A' and 'A4' size paper trays only |
|
|
|
Cover Plate - for RS-232C/HP-IB Connectors |
|
|
|
Upper slider rod - Shaft that the carriage assembly rides on |
|
|
|
Lower slider rod - Shaft that the carriage assembly rides on |
|
|
|
Pinchwheel Shaft |
|
|
|
Pinchwheel (Rubber) - for Serial >&= 3104A (2 Used) |
|
|
|
of the X-Y Chassis Assembly) |
|
|
|
Pen holding arm (Pawl) - On carriage assembly |
|
|
|
Tray Bottom - Main Structure for the 'B' and 'A3' Size Paper |
|
|
|
Tray Bottom - Main Structure for the 'A' Size Paper Tray |
|
|
