Part number |
Description |
Diagram |
Service |
|
FLEXIBLE BUSH |
|
|
|
FLEXIBLE BUSH |
|
|
|
SNAP BUSHING (SB-1500-21) |
|
|
|
OPEN-CLOSED BUSH |
|
|
|
OPEN-CLOSED BUSHING (OCB-500) |
|
|
|
LOCKING CIRCUIT BOARD SUPPORT |
|
|
|
LOCKING CIRCUIT BOARD SUPPORT |
|
|
|
LOCKING CIRCUIT BOARD SUPPORT |
|
|
|
LOCKING CIRCUIT BOARD SUPPORT |
|
|
|
EDGE SUDDLE (EDS-1) |
|
|
|
EDGE SUDDLE (EDS-1717U) |
|
|
|
EDGE SUDDLE (EDS-1208U) |
|
|
|
EDGE SUDDLE (EDS-2323U) |
|
|
|
RELAY CONNECTOR 175694-4 (10/1 |
|
|
|
RELAY CONNECTOR |
|
|
|
HEXAGON CROSS RECESSED RS TAP |
|
|
|
LABEL |
|
|
|
Additional Self Paced Trng Test(1 Test) for 2225A/B/C/D/P |
|
|
|
Bail Arm (New Style: Attaches to the Bail Shaft With 'E' |
|
|
|
Foot - for the Bottom of the Printer (4 Used) |
|
|
|
Pinch Roller - on Bail Arm Shaft (2 Used) |
|
|
|
Carriage rod - Shaft that the carriage assembly rides on |
|
|
|
Platen shaft (Square) - Turns pinfeed and grit wheels |
|
|
|
'E' Rings) Note: for Older Models Also Order New Bail Arms |
|
|
|
Head latch - Retains print cartridge in carriage assembly |
|
|
|
Wheel Guide - for Tractor Pinfeed Wheels (2 Used) |
|
|
|
Pinfeed Wheel - Nubed Wheel - for Tractor Drive (2 Used) |
|
|
|
Reduction Gear (Double Gear) - Mounts on Right Side of Mech |
|
|
|
Idler gear (Largest gear) - Driven by the paper drive motor |
|
|
|
Drive Gear - Mounts on the End of the (Square) Platen Shaft |
|
|
|
Lift-up viewing window/front cover - Logo label NOT included |
|
|
|
Bottom case (plastic) |
|
|
|
Top case (plastic) - Has sides, and rear half of top cover |
|
|
|
Grit Wheel - Mounts on Square Shaft - for Paper Feed(2 Used) |
|
|
|
Paper separator - Attaches to top case |
|
|
|
Rear Panel (ONLY) - has Cut Out for Centronics Connector |
|
|
|
Rear Panel (ONLY) - has Cut Out for RS-232C Connector |
|
|
|
HP-IL Connector and Cable Assembly - Mounts on Rear Panel |
|
|
|
HP-IB Interface Board - Mounts on Top of Transformer |
|
|
|
power switch, and battery box |
|
|
|
Rear Panel Assy - Includes Power Switch and Line Module |
|
|
|
for 100V to 240V Operation (Selectable) |
|
|
|
Fuse Holder - for 120V Operation ONLY |
|
|
|
RS-232C I/O Board - Mounts to Rear Panel |
|
|
|
Rear Panel Assy - Includes Power Switch and Line Module |
|
|
|
board, power switch, and battery box |
|
|
|
CENTRONICS Interface Board (Includes Rear Panel Connector |
|
|
|
CENTRONICS (Portable) Connector Board - Mounts on Rear Panel |
|
|
|
Power Switch Assembly - Mounts on the Rear Panel |
|
|
|
- Mounts in Bottom of Printer |
|
|
|
Main Logic Board - Mounts in Bottom of Printer |
|
|
|
Main Logic Board - Mounts in Bottom of Printer |
|
|
|
Main Logic Board - Mounts in Bottom of Printer |
|
|
|
Main Logic Board - Mounts in Bottom of Printer |
|
|
|
Main Logic Board - Mounts in Bottom of Printer |
|
|
|
in Bottom of Printer |
|
|
|
Print mechanism assembly - Does NOT include motors |
|
|
|
drive cable |
|
|
|
Keypad Switch Assembly - Mounts to Top Cover |
|
|
|
Carriage Assembly - Includes Flex Cable |
|
|
|
Flex Cable - from Main Logic Board to Carriage Assembly |
|
|
|
'ThinkJet' Logo Decal - Attaches to the Front of the Window |
|
|
|
Flex Cable - from Main Logic Board to I/O Board |
|
|
|
Flex Cable - from Main Logic Board to I/O Board |
|
|
|
Flex Cable - from Main Logic Board to I/O Board |
|
|
|
Keypad Switch Overlay - Mounts on Top Cover |
|
|
|
2225A HP-IB ThinkJet owner's manual |
|
|
|
2225B HP-IL (Portable) ThinkJet owner's manual |
|
|
|
2225C/C+ Centronics ThinkJet owner's manual |
|
|
|
2225P Centronics (Portable) ThinkJet owner's manual |
|
|
|
2225 ThinkJet series printer service manual |
|
|
|
2225D/D+ RS-232C ThinkJet owner's manual |
|
|
|
Additional Self Paced Training Test(1 Tst) - 2227A/B & 2228A |
|
|
|
PCA Shield - Screws on top of Main Logic Board |
|
|
|
Spring - for Paper Release Handle |
|
|
|
Bail Spring - for Bail Arm Tension (2 Used) |
|
|
|
Bail Roller - on Paper Bail Shaft (2 Used) |
|
|
|
Wiper Disk - on Left End of Platen |
|
|
|
Platen knob - On right side of printer |
|
|
|
Pinfeed Wheel - Nubed Wheel on Tractor Drive Shaft (2 Used) |
|
|
|
Reduction gear - Large gear at back - Driven by paper motor |
|
|
|
Tandom Gear - P/O Gear Train on Right End of Mech (2 Used) |
|
|
|
Top Cover - Lift-Up Cover - at Back of Printer |
|
|
|
'Paper Out' lever - Sensor lever in bottom of mechanism |
|
|
|
Paper release handle - Paper loading lever |
|
|
|
Left paper bail arm |
|
|
|
Right paper bail arm |
|
|
|
Idler gear - At top back - Drives tractor shaft |
|
|
|
Star Roller - on Paper Bail Shaft (5 Used) |
|
|
|
Left tractor clip - Lift-up cover on tractor guide assembly |
|
|
|
Right tractor clip - Lift-up cover on tractor guide assembly |
|
|
|
Tractor release lever - On tractor guide assembly |
|
|
|
Power Switch Assembly - on Lower Left Front of Printer |
View |
|
|
Keypad Assembly - Does NOT Come With Overlay |
|
|
|
Fuse Assembly - Used in Power Module (AC Adapter) |
|
|
|
Bail shaft - Mounts between left and right bail arms |
|
|
|
Left tractor guide assembly - Clips around pinfeed wheel |
|
|
|
Right tractor guide assembly - Clips around pinfeed wheel |
|
|
|
Tractor shaft assembly - Square shaft for tractor drive |
|
|
|
Paper Drive Motor - Monted on Back Right of Mechanism |
|
|
