Description

Diagram

Service

HP Plotter Pens

FIBER TIP PENS FOR PLOTTER

HP Disposable draft pen

HP Plotter paper

HP Plotter pens(ORANGE TIP)

HP Plotter Pens(RED TIP)

ROM (Firmware)(28 Pin IC) - If Main Logic Board Has 32 Pin

ROM (Firmware) - for Main Logic Board

ROM (Firmware) - For main logic board

1MB SIMM Memory Module - 80nS, 36 Bit (C2063A)

EPROM

EEPROM (U26) - on Processor Board

ROM (Firmware) - for Main Logic Board

16MB SIMM,MEMORY(2747AORC3146A) (NO exchnage)

8MB 70ns DRAM SIMM Memory Module (C2323A)

4MB 70ns DRAM SIMM Memory Module (C3491A)

EEPROM (U 42)- ON LOGIC BOARD

EPROM (C0) revision 7.01 - On main logic board (Note: use ONLY with other 1818-597X series ROM'S )

EPROM (C1) revision 7.01 - On main logic board (Note: use ONLY with other 1818-597X series ROM'S )

EPROM (C2) revision 7.01 - On main logic board (Note: use ONLY with other 1818-597X series ROM'S )

EPROM (C3) revision 7.01 - On main logic board (Note: use ONLY with other 1818-597X series ROM'S )

ROM - U28 on Main Logic Board (Revision B.02.01)

ROM - U29 on Main Logic Board (Revision B.02.01)

ROM - (U31)ON main logic board - Revision is 5.11

ROM - (U30)ON main logic board - Revision is 5.11

ROM - (U33)ON main logic board - Revision is 5.11

ROM - (U32)ON main logic board - Revision is 5.11

4MB EDO

8MB EDO

16MB EDO (Extended Data Output) DRAM SIMM (C6231A)

MASKED -ROM

ROM's (42 Pin) in U28/U29 Sockets and Leave U4/U9 Empty

DRAM 256KX16

DRAM 1MX4

64MB SDRAM memory module (3.3v, 133MHz, 144-pin SO-DIMM)

80486SX

IC-ASIC CL-BSD

SCALE PLATE SCREW

BUSHING

ORDER 192142181KC

HANDLE

ROLLER DRIVE GEAR (INWARD)

GEAR (B)

STEPPED SCREW

ORDER 56AA17760KC

Carousel Sensor - Attaches to Carousel Sensor Board -

Display LCD - for Front Panel

Photoswitch Detector - Mounted on Side of Carousel Base

Infrared LED Source - Mounted in Center of Carousel Base

Display LCD - Mounts in the Control (Front) Panel Assembly

PAPER EDGE SENSOR

PAPER SENSOR

OPTICAL SENSOR

MEDIA SENSOR

SENSOR-ENCODER LF

1MB FOR LaserJet 4L

Fuse - 4A, 250V - for 020V Operation (White Fuseholder)

Fuse - 3.05A, 250V - F0 on Main Logic Board

Pico Fuse - 2.5A, 025V - for F0-F02 on Motor/Head Driver Bd

TENSION PLATE ASSY/FRONT

STAPLE BODY W/CASE HNDLE NO STAPLES

ORDER 20AK-5010KC

ACTUATOR/2

STAPLE BODY W/CASE HNDLE 0 STAPLES

CARTRIDGE CASE

CARTRIDGE CASE

OPEN-CLOSE KNOB

PAPER EXIT FACE-DOWN TRAY OPENING COVER

PAPER EXIT TRAY EXTENSION

PAPER EXIT TRAY

PAPER EXIT FACE-DOWN TRAY

PAPER EXIT FACE-DOWN TRAY EXTENSION

PAPER EXIT GUIDE STAY

BOOKLET TRAY

Fuse - 2A, 250V - F1 & F3 on Motor Driver Board

Fuse - 1.6A, 250V - for 220V/240V Operation

Fuse - 5A, 250V - for 100V/220V Operation

Fuse - 2.5A, 250V - for 100V/120V Operation

Fuse - 600mA, 250V - for 100V/120V Operation

Fuse - 5A, 250V - Located in Power Supply

Fuse - 300mA, 250V - for 220V/240V Operation

Fuse - 10A, 250V - F2 on Motor Driver Board

Fuse - 500mA, 250V - for 100V Operation in Japan

Fuse - 1.5A, 250V - for 100V/120V Operation

Fuse - 400mA, 250V - for 120V Operation in USA/Canada

Fuse - 1A, 250V - for 100V/120V Operation

Fuse - 500mA, 250V - for 220V/240V Op - for Serial < 2736A

Fuse - 250mA, 250V - for 220V Operation in Europe

Fuseholder Cap (Gray) - for 100V/120V Operation

Fuseholder body - Cap NOT included

Fuseholder cap (Black) - For 220V/240V operation

Fuse - 200mA, 250V - for 240V Operation in the UK

Fuse - 7A, 250V - for 120V/240V Operation

Fuse - 2.5A, 250V - for F1 and F2 on Main Logic Board

Fuse - 7A, 250V - for F3 on Power Supply Board

Fuse - 800mA, 250V - for F2 on Main Logic Board

Fuse - 1.6A, 250V - for F3 on Main Logic Board

Fuse - 1A, 250V - for 100V/120V Op - for Serial < 2736A

Fuseholder (Black) - for 120V/240V Operation

Pico Fuse - 2A, 125V - for F1 on Main Logic Board