Part number |
Description |
Diagram |
Service |
|
Front cover - Includes tear bar and QuietJet PLUS logo |
|
|
|
Base assembly - Bottom cover of printer |
|
|
|
Main logic board - With HP-IB interface |
|
|
|
Top Cover - Includes Top (w/ Keypad Overlay), Rear & Sides |
|
|
|
Main logic board - With RS-232C/Centronics interfaces |
|
|
|
Carriage assembly - Includes flex cable |
|
|
|
Print mechanism assembly - Includes printer base |
|
|
|
Platen Roller Assembly - Includes wiper disk |
|
|
|
Carriage drive cable - Wire cable which moves the carriage |
|
|
|
Flex Cable - from Main Logic Board to Carriage Assembly |
|
|
|
Nameplate - QuietJet PLUS Logo |
|
|
|
Absorber - at far Left End of Platten - next to Wiper Disk |
|
|
|
Wiper-Wiper - Cleans Wiper Disk - on Left End of Platen |
|
|
|
2227A/B and 2228A QuietJet printers owner's manual |
|
|
|
2227A/B and 2228A QuietJet printers owner's manual (German) |
|
|
|
2227A/B and 2228A QuietJet printers owner's manual (French) |
|
|
|
2227B QuietJet PLUS Service Manual Supplement (to 2227A and |
|
|
|
2227A and 2228A QuietJet printers service manual |
|
|
|
Top cover - Lift-up cover - At back of printer |
|
|
|
Bail shaft - Mounts between left and right bail arms |
|
|
|
Tractor shaft assembly - Square shaft for tractor drive |
|
|
|
Front cover - Includes tear bar and QuietJet logo |
|
|
|
Base assembly - Bottom cover of printer |
|
|
|
Top Cover - Includes Top (w/ Keypad Overlay), Rear, & Sides |
|
|
|
Carriage assembly - Includes flex cable |
|
|
|
Print mechanism assembly - Includes printer base |
|
|
|
Platen Roller Assembly - Includes wiper disk |
|
|
|
Carriage drive cable - Wire cable which moves the carriage |
|
|
|
Flex Cable - from Main Logic Board to Carriage Assembly |
|
|
|
Nameplate - QuietJet Logo |
|
|
|
Additional Self Paced Training Test(1 test) - 2235A/B/C/D |
|
|
|
Motor retainer - Holds both motors in place |
View |
|
|
Pinch Roller Spring Plate - Under Platen Roller |
View |
|
|
Ground plane - Under main logic board |
|
|
|
Left Ground Plane - Attached to Left Side of Print Structure |
View |
|
|
Right Ground Plane - Between Paper Motor and Print Mechanism |
View |
|
|
Back Ground Plane - Attaches to Back of Print Mechanism |
View |
|
|
Wearstrip Clip - Holds Printhead Cable Wearstrip in Place |
View |
|
|
Toriod clamp - Holds toriod on keypad cable in place |
View |
|
|
Printhead Cable Clip - Attaches to Printhead |
View |
|
|
Paper Tension Spring Plate - Below Pinch Roller Plate |
View |
|
|
Front Cover Spring Clip (2 Used) |
|
|
|
Idler pulley - For carriage belt tension |
View |
|
|
Bail spring - On left side of paper bail |
View |
|
|
Lower guide rail - Shaft that the printhead rides on |
View |
|
|
Upper guide rail - Shaft that the printhead rides on |
View |
|
|
Tractor Shift Lever Spring - on Right End of Drive Shaft |
View |
|
|
Spring - for Carriage Belt Tension - Goes on Pulley Wedge |
View |
|
|
Pinch Roller (4 Used) |
View |
|
|
Paper Output Extension (Support) - on Rear of Printer |
View |
|
|
Carriage belt |
View |
|
|
Bearing/Latch - one on Each End of Platen Roller (2 Used) |
View |
|
|
Left latch - For securing rear cover to base |
View |
|
|
Right latch - For securing rear cover to base |
View |
|
|
Interlock switch cover - Mounts toward front of base |
|
|
|
Paper Cassette Tray Slot Cover - on Rear of Printer |
View |
|
|
Carriage motor insulator (Isolator) - Tee shaped |
View |
|
|
Print Mechanism Core - Includes NO Attaching Parts - for |
View |
|
|
Lever arm - Actuator for paper out sensor |
View |
|
|
Pulley wedge - For carriage belt tension |
View |
|
|
02235-60011 HP 2235 MAIN LOGICS BOARD |
|
|
|
RFI Shield - Covers Main Logic Board |
|
|
|
Base assembly - Bottom cover - Includes feet |
|
|
|
Back half cover assembly - Includes clips for sound muffler |
View |
|
|
Front half cover assembly - Swings up from back cover |
View |
|
|
and the Power Supply |
|
|
|
HP 02235-60032 PCBA MAIN BOARD RUGGEDWRITER |
|
|
|
Left Tractor Assy - Clips Over Pinfeed Wheel on Drive Shaft |
View |
|
|
Right Tractor Assy - Clips Over Pinfeed Wheel on Drive Shaft |
View |
|
|
Sound muffler cover - Hinged lift-up cover on back half |
View |
|
|
Platen Roller Assembly |
View |
|
|
Paper Drive Motor - on Right Side of Print Mechanism |
View |
|
|
Paper Bail Assembly - Attaches to Platen Roller Assembly |
View |
|
|
Power supply assembly |
|
|
|
Printhead assembly |
View |
|
|
Tractor drive shaft assembly - Includes pinfeed wheels |
View |
|
|
Font cartridge slot cover |
|
|
|
Keypad assembly - Includes ribbon cable |
View |
|
|
Carriage Drive Motor - on Right Side of Print Mechanism |
View |
|
|
Cable Assembly - from Main Logic Board to Printhead |
View |
|
|
Paper gap adjust lever - On left end of upper guide rail |
View |
|
|
EPROM (Firmware) - U15 on main logic board |
|
|
|
Page counter |
|
|
|
Printhead replacement bearing kit |
|
|
|
Separator kit - Prevents paper jams |
|
|
|
Hinge clip kit - For sound muffler |
|
|
|
Tractor lock kit - Secures tractor from moving left to right |
|
|
|
Power supply assembly |
|
|
|
Printhead assembly |
View |
|
|
Carriage 'home' sensor assembly |
View |
|
|
'Paper out' sensor assembly |
View |
|
|
Serial number label |
|
|
|
Interlock Switch - Mounts Toward Front of Base |
|
|
|
Nameplate - RuggedWriter 480 Logo - Attaches to Front Cover |
View |
|
|
'Paper Load' label |
|
|
|
'Arrow' instruction label |
|
|
|
RuggedWriter 480 owner's manual |
|
|
|
RuggedWriter 480 service manual |
|
|
|
AOF First Pickup Roller |
|
|
|
ADF Second Pickup Roller |
|
|
