Part number |
Description |
Diagram |
Service |
|
Nameplate - Front Left Corner of Printer |
|
|
|
Tractor drive shaft - Through top of both tractors |
|
|
|
Tractor guide shaft - Through center of both tractors |
|
|
|
Front Panel Bezel (Dove Gray Color) - Window NOT Included |
|
|
|
Analog board - Main power supply/mother board |
|
|
|
Print Bar (also Called Corebar) - in Print Mechanism |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Encoder Board - Located towards the Front Left of Print Mech |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Encoder Cable - From Encoder Board to Analog/Power Supply Bd |
|
|
|
Cable - for Print Bar Motor |
|
|
|
assembly with attached metal and plastic brackets, hammer |
|
|
|
Weldment - Main Frame that Ribbon & Paper Motors Attach to |
|
|
|
bracket - 79cm (31 inches) long - (P/O Print Bar/Front Panel |
|
|
|
Sensor/Switch Assy - Consists of Paper Out & Platen Open |
|
|
|
Standard Tractor |
|
|
|
Pair of Tractors - Left and Right - Must Replace as a Pair |
|
|
|
Print Bar (also Called Corebar) - in Print Mechanism |
|
|
|
Encoder Board - Located towards the Front Left of Print Mech |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Analog board - Main power supply/mother board |
|
|
|
2562C/2563A/B/C Printer - Service (and Parts) Manual |
|
|
|
Multiple Interface Board (RS232/422/Super Centronics) Manual |
|
|
|
Ribbon shield - Attached to print bar by four screws |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
Paper Tray - Mounts on Back of Printer Stand at Bottom |
|
|
|
Hammer Driver Board - Mounts Vertically in Base Assembly |
|
|
|
Print Bar (also Called Corebar) - in Print Mechanism |
|
|
|
Shock Gas spring sold individualy |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Hammer Driver Data Cable - from Analog to Hammer Driver Boar |
|
|
|
Hammer Driver Power Cable - from Analog to Hammer Driver Bd |
|
|
|
Fan Cable - from Analog Board to Printer Stand Fan |
|
|
|
Fan Cable - from Analog Board to Fan on Printer Base |
|
|
|
Cable - for Print Bar Motor |
|
|
|
Printer Stand(NON Quietized Version) - Dove Gray Color |
|
|
|
Hammer Driver Cable - from Hammer Driver Board to Print Bar |
|
|
|
Crank Assembly (in Print Mech) - Driven by Print Bar Motor |
|
|
|
Printer Stand(Quietized Version) - Dove Gray Color |
|
|
|
Stacker Assembly - Attaches to Sound Shroud to Stack Paper |
|
|
|
Open Switch and the Paper Motion 'Hall Effect' Sensor |
|
|
|
Velocity Transducer - Mounts on Left Side of Print Mechanism |
|
|
|
Base Assembly(Dove Gray Color) - for Printer with Stand |
|
|
|
Ribbon Drive Motor - Right Front Corner of Print Mechanism |
|
|
|
Sound Scroud - Attaches Where Paper Exists to Reduce Noise |
|
|
|
Sound shroud - Attaches where paper exits to reduce noise |
|
|
|
Chain - Hangs Down From inside of Powered Paper Stacker Door |
|
|
|
Platen adjustment knob - Round wheel left side of print mech |
|
|
|
over Base Assembly - Includes Shock and Top Lid |
|
|
|
Front Door (Dove Gray Color) - of Printer Stand |
|
|
|
Print Bar (also Called Corebar) - in Print Mechanism |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Hammer Driver Board - Mounts Vertically in Base Assembly |
|
|
|
2563A/B and 2564B Printer - Operators Manual |
|
|
|
2563C/64C Printer - Operators Manual |
|
|
|
2564B/C Printers - Service (and Parts) Manual |
|
|
|
Manual addendum - Used with 2564B service, parts & diagrams |
|
|
|
Panel (Dove Gray color) - Right front of printer |
|
|
|
Paper Tray - Back of Printer on Bottom |
|
|
|
Inner shroud (Dove Gray color) - Attaches under top cover at |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
Hinge - Chassis mounted lower hinge for front door |
|
|
|
Hinge - Chassis mounted upper hinge for front door |
|
|
|
Hinge - to Mount Top Cover to Printer 'Piano' Type Hinge |
|
|
|
Backstop - 'L' shaped paper stop in powered paper stacker |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
cover at rear of printer |
|
|
|
Cover Plate - for Interface Connectors - Back of Printer |
|
|
|
Front Panel Bezel (Dove Gray Color) - Window NOT Included |
|
|
|
Front Panel Bezel(Parchment White Color)-Window NOT Included |
|
|
|
Cover - Print mechanism right side cover |
|
|
|
Cover - Print mechanism left side cover |
|
|
|
View Window - for (Dove Gray Color) Top Cover |
|
|
|
assembly that is a part inside the powered paper stacker |
|
|
|
View Window - for (Parchment White Color) Top Cover |
|
|
|
Back Wall of the Lower Half of the Electronics Bay |
|
|
|
Against the Left Bay Wall |
|
|
|
Lower Tractor Control Bd - under 3 Main Tractor Control Keys |
|
|
|
IB interface board |
|
|
|
BackPlane Bd - Formatter, Servo, Interface Bds Plug into it |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Hammer Driver Bd - Right Side - Upper Half of Electronic Bay |
|
|
|
Servo Control Bd - Mounts in One of Four Card Cage Slots |
|
|
|
Top cover (Dove Gray color) - View window NOT included |
|
|
|
Door (Dove Gray color) - Front of printer |
|
|
|
Panel (Dove Gray color) - Left side of printer |
|
|
|
Panel (Dove Gray color) - Rear of printer |
|
|
|
Panel (Dove Gray color) - Right side of printer |
|
|
|
Cable - Velocity Transducer |
|
|
|
Cable - Power Cable for Hammer Driver Board |
|
|
|
Drive Coil - Mounts to Right Side of Print Bar |
|
|
|
Power Input Assy(120V) = PowerSwitch, AC Input, Line Filter |
|
|
|
Paper stacking device - Hangs down from rear sound shroud |
|
|
|
Sound shroud - Attaches to back of printer where paper exits |
|
|
|
Drive shaft - For upper left & right tractors |
|
|
|
Front Panel Cable - from Front Panel to Formatter Board |
|
|
