Part number |
Description |
Diagram |
Service |
|
Cable - Print Bar Cable |
|
|
|
Cable - Ribbon Cable for Hammer Driver Board |
|
|
|
Power Input Assy(240V) = PowerSwitch, AC Input, Line Filter |
|
|
|
Cable - for Ventilation Fans Located Behind Right Side Panel |
|
|
|
Top right cover (Dove gray color) - Has cut out for control |
|
|
|
Motor - Drives Paper Tractors - Top Right Rear of Printer |
|
|
|
Cable - Upper and Lower Right Tractor Drive Cable |
|
|
|
Cable - Upper and Lower Left Tractor Drive Cable |
|
|
|
Tractor - Lower Left Tractor Assembly |
|
|
|
Tractor - Upper Left Tractor Assembly |
|
|
|
Tractor - Upper Right Tractor Assembly |
|
|
|
Tractor - Lower Right Tractor Assembly |
|
|
|
Sensor - Paper Motion - under Upper Left Tractor Assembly |
|
|
|
Drive shaft - For lower left & right tractors |
|
|
|
Paper Out Switch - Mounted on Lower Left Tractor Assembly |
|
|
|
driven by motor on right side of stacker |
|
|
|
Motor - in Powered Paper Stacker |
|
|
|
Door (Dove Gray color) - Front of powered paper stacker |
|
|
|
Door (Parchment White color) - Front of printer |
|
|
|
Panel (Parchment White color) - Left side of printer |
|
|
|
Panel (Parchment White color) - Rear of printer |
|
|
|
Top cover (Parchment white color) - View window NOT included |
|
|
|
Panel (Parchment White color) - Right side of printer |
|
|
|
control panel |
|
|
|
Door(Parchment White Color) - Front of Powered Paper Stacker |
|
|
|
Panel (Parchment White color) - Right front of printer |
|
|
|
Mechanism Cover - For Upper and Lower Ribbon Drive (2 Used) |
|
|
|
Shock (Gas Spring)(150LB) - Holds up Print Mech Swing Gate |
|
|
|
Lower Tractor Control Bd - under 3 Main Tractor Control Keys |
|
|
|
BackPlane Bd - Formatter, Servo, Interface Bds Plug into it |
|
|
|
Control/formatter board - Has processor and firmware ROMs |
|
|
|
Against the Left Bay Wall |
|
|
|
Hammer Driver Bd - Right Side - Upper Half of Electronic Bay |
|
|
|
Servo Control Bd - Mounts in One of Four Card Cage Slots |
|
|
|
Back Wall of the Lower Half of the Electronics Bay |
|
|
|
Powered paper stacker - Operator manual |
|
|
|
2566B/C and 2567B/C products - Operator manual |
|
|
|
2566B/C and 2567B/C products - Service manual |
|
|
|
Powered paper stacker - Installation manual |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
Nameplate - Front Left Corner of Printer |
|
|
|
Nameplate - 2680A |
|
|
|
View Window - in Top Cover |
|
|
|
Filter - For two fans in PAMM assembly |
|
|
|
Filter - Located at Lower left Rear Corner of Printer |
|
|
|
Overlay - For top cover keyboard |
|
|
|
Overlay - For paper control keyboard |
|
|
|
Cover - Top cover of printer |
|
|
|
End Cap - for Paper Input Tube |
|
|
|
Bezel - for Paper Control Keypad - Front Left Side of Unit |
|
|
|
Paper flapper - Six used in flapper box assembly |
|
|
|
Top Cover Bezel - Top Cover View Window Attaches to it |
|
|
|
Window - for Paper Out Sensor Inside of Paper Input Tube |
|
|
|
Switch - Interlock for Front Door |
|
|
|
DCS data processor board - Installs in cardcage |
|
|
|
DCS print control board - Installs in cardcage |
|
|
|
DCS interface board - Installs in cardcage |
|
|
|
Simultaneous corona transformer - In upper right rear corner |
|
|
|
DC power board - Slides into top of cardcage assembly |
|
|
|
AC power board - Behind rear panel - Upper middle of printer |
|
|
|
Power distribution board - Mounts on top of DC power supply |
|
|
|
Isolation Transformer - Behind Blower Assy of Vacuum System |
|
|
|
Power Input Module - Module Has Power Cord Connected to it |
|
|
|
Optics casting - Right end of printer |
|
|
|
Scanner Drive Motor - Attaches to Optics Casting |
|
|
|
Reflector Assembly - is Part of Preheater Fusing Assembly |
|
|
|
PAMM Door Cover - PAMM Door is on Left Most Side of Printer |
|
|
|
Primary Corona assembly - Handle labeled 'Primary' |
|
|
|
Transfer Corona assembly - Handle labeled 'Transfer' |
|
|
|
Simultaneous Corona assembly - Handle labeled 'Simultaneous' |
|
|
|
Paper Input Tube - Includes Paper Out Sensor & Window Assy |
|
|
|
Web Tension Assy - Has Left and Right Paper Feed Pinwheels |
|
|
|
Electrostatic monitor (ESM) - Mounts to right of drum assy |
|
|
|
Keyboard Assembly - To the Right of Top Cover View Window |
|
|
|
Vacuum System Blower Assy(120V) - Behind Right Front Door |
|
|
|
Flapper Box(120V) - Attaches to Bottom of PAMM Door Assembly |
|
|
|
Elevator Assembly (120V) - Output Paper Stacked on This Assy |
|
|
|
ChainBox Drive Assembly(120V) = Motor, GearBox and Spur Gear |
|
|
|
Tension drive motor - For paper output area |
|
|
|
Preheater fusing system assembly |
|
|
|
Triac assembly - Next to AC power board - Behind rear panel |
|
|
|
Chainbox assembly - Has 6 chain assemblies as a part of it |
|
|
|
Cable - for Primary Corona Assembly |
|
|
|
Cable - for Transfer Corona Assembly |
|
|
|
Cable - for Simultaneous Corona Assembly |
|
|
|
Developing assembly |
|
|
|
Toner Hopper Assembly(120V) - Behind Right Front Door |
|
|
|
MCS High Voltage Power Supply - Installs in Cardcage |
|
|
|
MCS control board - Installs in cardcage |
|
|
|
MCS monitor board - Installs in cardcage |
|
|
|
Backplane Assembly - The Board Cardcage Assemblies Plug into |
|
|
|
Sensor board - Has paper out sensor adjustment on this board |
|
|
|
Developer Volume Sensor - on Left Side of Developer Assembly |
|
|
|
Optical Density Sensor (Densitometer) - Located in EP Area |
|
|
|
Sensor - Elevator Position - Bottom of Elevator Assembly |
|
|
|
PAMM Door Blower Assembly(120V) - Next to Flapper Box Assy |
|
|
|
Lamp holder board - For lamps in EP area |
|
|
|
Retraction solenoid - On back wall of EP area |
|
|
|
Electrostatic monitor (ESM) solenoid - Back wall of EP area |
|
|
|
Sensor - Paper Width - Located in Paper Input Tray Assembly |
|
|
